Subject: Calculating cell phone base station emissions (McLean). Date: Thu, 07 Sep 2000 070914 -0500 From: Roy BeaversTo: guru -------------------------------------------------- .........From EMF-L....... Sounds to me like the following will calculate **estimated** field intensity from the base station only. That, of course, is not the same as an actual measurement which would (should) pick up the base station PLUS other emissions, thus providing better information about the actual "Blue World" exposure present...... (In case you haven't noticed, guru continues to be troubled about discussions of exposures which **assume** ONLY the one NEW piece of emitting equipment...... These cases often result in much more equipment being added-on later, after the tower is constructed. AND, the emission characteristics of the later equipment may be different as well!! ......I continue to believe that -- **so long as we do not get proper governmental regulation AND MONITORING** -- the **real question** is: WHAT ARE WE OPENING THE DOOR TO -- IN THE FUTURE!!!!!......guru......) -------- Original Message -------- Subject: Re: Date: Thu, 07 Sep 2000 20:26:54 +1000 From: "EMRAA (EMR Alliance Australia)" To: roy@emfguru.com References: <3.0.1.32.20000904091530.006898c4@mail.acay.com.au> Dear Roy Your readers may be interested to hear about a new software package which can calculate the emissions of a base station. Called, Base Station FIP (Field Intensity Plotter), the package was developed by Telstra in Australia. It calculates the emission levels of a base station when relevant information is entered,depicts the EME levels graphically and can be operated using Windows. Telstra will market the package internationally and will launch the product in Australia on 7th and 11th Sept (in Sydney and Melbourne respecively). Public information sessions will be held later in the year. Effectively, the software package will mean cheaper access to information about emission levels for the community. Best wishes Lyn McLean Archive provided courtesy of WaveGuide, http://www.wave-guide.org Reprinted with permission of Roy Beavers, http://www.emfguru.com